
Impresora Zebra ZM400
Características
- Thermal transfer and direct thermal operating modes (can only use one mode at a time)
- Die-cast aluminum base, frame, and printhead mechanism
- Multi-lingual backlit 240×128 pixel graphic display
- 32-bit processor
- Auto-calibration
- Real Time Clock
Ver en Tienda Solicitar Presupuesto
Especificaciones Zebra ZM400
- 203 dpi (8 dots/mm)
300 dpi (12 dots/mm)
600 dpi (23.5 dots/mm)
- 16 MB DRAM
8 MB Flash
64 MB Factory-Installed On-Board Optional Flash (optional)
- 4.09″ (104 mm)
- Length with 203 dpi: 157″ (3,988 mm)
Length with 300 dpi: 73″ (1,854mm)
Length with 600 dpi: 39″ (991mm)
- 203 dpi: 10″ (254 mm)/sec
300 dpi: 8″ (203 mm)/sec
600dpi: 4″ (102 mm)/sec
- Reflective
Transmissive
Media Caracteristicas
- Maximum label and liner width
- 4.5″ (114 mm) – tear & cutter
4.25″ (108mm) – peel & rewind
- Minimum label and liner width
- 1″ (25 mm) – tear & cutter, peel & rewind
- Maximum label and liner length
- 39″ (991mm)
- 8″ (203 mm)
- 3″ (76 mm)
- 0.0023″ (.058 mm) to 0.010″ (0.25 mm)
- black mark, continuous, die-cut, fanfold, notched, perforated, tag stock
Ribbon Caracteristicas
- 3.2″ (81.3 mm)
- 1476′ (450 m) or 984′ (300 m)
- 3:1 media roll to ribbon ratio
- 2″ (51 mm) to 4.33″ (110 mm)
- Ribbon wound ink-side out or ribbon wound ink-side in (configurable one or the other, but not both)
- 1.0″ (25.4 mm)
Caracteristicas Operativas Zebra ZM400
- TT: Operating temperature 40° F (5° C) to 104° F (40° C) Thermal transfer
DT: Operating temperature 32° F (0° C) to 104° F (40° C) Direct thermal
- -40° F (-40° C) to 140° F (60° C)
- 20-85% non-condensing R.H.
- 5-85% non-condensing R.H.
- Universal auto-detectable (PFC-compliant) power supply 90-265 VAC
- IEC 60950-1 EN 55022 Class B
EN 55024
EN 61000-3-2
EN 61000-3-3
Caracteristicas Físicas Zebra ZM400
- 10.9″ (278 mm)
- 13.3″ (338 mm)
- 18.7″ (475 mm)
- 32.4 lbs (15 kg)
- 49 lbs (22 kg)
Opciones y comunicaciones
- Options
-
- 300 dpi (12 dots/mm) printhead
- 600 dpi (23.5 dots/mm) printhead
- 64 MB Factory-Installed, On-Board Flash Memory (58 MB user available)
- Cutter with catch tray
- Value peel (front mount, passive peel option with no liner take-up)
- Peel with liner take-up
- Rewind, internally rewinds full label roll on three-inch core (comes with taller, non-standard printer base)
- Ribbon supply spindle for ribbon ink coated inside
- RFID Field Upgrade Kit – installed by an Authorized Service Provider or return to factory
- ZebraDesigner
- ZebraDesigner Pro
- ZebraDesigner for XML
- ZebraNet Bridge Enterprise
- XML-enabled printing
- Printhead conversion kits
- ZebraCare Extended Warranty
- European and Asian font sets
- APL-I
- APL-D
- Communication and Interface Capabilities
-
- RS-232C serial port
- RS 232 to RS-422/485 serial port adaptor
- RS232 DB9 to DB25 adaptor
- High speed, IEEE 1284, bi-directional parallel interface
- ZebraNet Wireless Plus (optional)
- ZebraNet 10/100 Print Server (internal/external option)
- ZebraNet PrintServer II (Discontinued)
Lenguajes
- Core programming languages
- ZPL, ZPL II, EPL, XML
Bar Codes/Simbologias
- Linear
- Codabar
Code 11
Code 128 with subsets A/B/C and UCC case codes
Code 39
Code 93
EAN-13
EAN-8
Industrial 2-of-5
Interleaved 2-of-5
Logmars
MSI
Planet Code
Plessey
Postnet
RSS (reduced space symbology)
Standard 2-of-5
UPC and EAN 2 or 5 digit extensions
UPC-A
UPC-E
- 2-dimensional
- Aztec
Codablock
Code 49
Data Matrix
MaxiCode
QR Code
PDF417
MicroPDF417
RSS / GS1 DataBar family (12 barcodes)
- Fonts and Graphics
-
- Standard fonts: 7 bitmapped, 1 smooth scalable (CG Triumvirate Bold Condensed)
- Sets: IBM Code Page 850 International character set
- Optional European and Asian font sets
- Supports user-defined fonts and graphics, including custom logos
- ZPL II drawing commands, including boxes and lines